my baby Q once the fire is going, theres a few inches in 2 places where the gas does not ignite at all, even during a cook up. The flame will will taper off in height as it approaches the dead spot
I cleaned the Q out yesterday, used scotchbrite around the area where the flame does not ignite. Did a cook up afterwards, nothing has changed
Not sure what to do
baby Q burner blockage, sort of
baby Q burner blockage, sort of
Baby Q + Rotisserie
GA + Rotisserie
WSM 14
GA + Rotisserie
WSM 14
Re: baby Q burner blockage, sort of
Go to your local Gas/Cig?welding supplier.
get a jet file kit and clean out the holes in the Stainless pipe.
Use the right sized file for the hole
get a jet file kit and clean out the holes in the Stainless pipe.
Use the right sized file for the hole
Cheers
Titch
Titch
-
- Posts: 155
- Joined: Mon Apr 18, 2016 3:25 pm
Re: baby Q burner blockage, sort of
Contact the supplier, tell them of the problem and ask their opinion as they may have had it happen be4.
They may give you a contact number for a weber advise line
Obviously it is old and has blockage inside the gas tube (obviously) but don't stuf around with it yourself unless advised by some-one of of some authority.
They may give you a contact number for a weber advise line
Obviously it is old and has blockage inside the gas tube (obviously) but don't stuf around with it yourself unless advised by some-one of of some authority.
An experienced cook & now a Weber Baby 'Q' devotee...
it's a very different world where you can smell but can't see what's happening with your food
it's a very different world where you can smell but can't see what's happening with your food
Re: baby Q burner blockage, sort of
aaaah gas axe tip cleaners, never thought of that, thanks man
Baby Q + Rotisserie
GA + Rotisserie
WSM 14
GA + Rotisserie
WSM 14