BBQ Mesh (Frogmat Clone) $3.95 Bargain!

Please post here any info in relation to BBQ product suppliers.
Company "ads" allowed as long as they pertain to BBQ-ing
urbangriller
Posts: 9453
Joined: Sun Sep 14, 2008 8:46 pm
Location: Perth WA

BBQ Mesh (Frogmat Clone) $3.95 Bargain!

Post by urbangriller »

Howdy Gents,

I was at Bunnings today and they have a new product!

This BBQ non-stick mesh is way thicker than any I have ever seen and is only $3.95 a sheet!

Sheets are 14 x 18 inch (356mm x 457mm)

Image

Image

Here are three in a Large Size pellet grill!...check out the overlap! Cover your entire cooking surface in non-stick mesh for $12...yes please! $8 for the smaller pellet BBQ!!

Image

Image

And the reciept! It's not a special price! It's a new product and that is the normal shelf price!

I would have put this down in "bargains" but it's the normal price, not a mark down!!!

Image

Great Stocking Stuffer!....maybe Santa will bring you a half dozen!

Cheers
Chris
Last edited by urbangriller on Thu Dec 19, 2013 3:01 pm, edited 1 time in total.
Common Sense is so rare these days it should be a Super Power!
Jlz
Posts: 19
Joined: Mon Aug 20, 2012 10:04 am
Location: Brisbane

Re: BBQ Mesh (Frogmat Clone) $3.95 Bargain!

Post by Jlz »

Thanks, will check it out.
Card Shark
Posts: 1240
Joined: Mon Jun 06, 2011 10:10 pm
Location: Gold Coast, QLD
Contact:

Re: BBQ Mesh (Frogmat Clone) $3.95 Bargain!

Post by Card Shark »

Good one UG, thank you!
beachbums
Posts: 1278
Joined: Sun Dec 05, 2010 5:51 pm
Location: Smokefireandfood.com

Re: BBQ Mesh (Frogmat Clone) $3.95 Bargain!

Post by beachbums »

Thanks for the headsup Chris. I'm off to Bunnies when I get home.

Cheers, Wayne
fleetz
Posts: 170
Joined: Mon Jan 31, 2011 3:12 pm

Re: BBQ Mesh (Frogmat Clone) $3.95 Bargain!

Post by fleetz »

Thanks Chris...
Yoder YS640 on comp cart, Grill Grates for the YS640, Weber Smokey Mountain 18.5, CyberQ WiFi Controller, Maverick ET-732, Maverick ET-733, Thermapen, Weber Q 320, A-MAZ-N 6" and 12" tubes
Mixin
Posts: 264
Joined: Sat Oct 19, 2013 10:43 pm

Re: BBQ Mesh (Frogmat Clone) $3.95 Bargain!

Post by Mixin »

Hope it's nationwide & not just in WA. I'll check out the local one tomorrow arvo.
Weber Kettle Fanatic....
Main go-to: Blue 57cm OTG
Fire restriction option: Black 57cm M/T butchered with a Weber gas conversion.
GMG DC for the lazy smoky cooks.
Weeknight special: Q200
Problem? What problem?
Nath
Posts: 2095
Joined: Wed Mar 13, 2013 1:15 am
Location: Perth WA

BBQ Mesh (Frogmat Clone) $3.95 Bargain!

Post by Nath »

Nice one Chris!
I'm sure I could read up in other threads but what's the advantage of using this mesh.


Nath
Nath
titch
Posts: 5868
Joined: Sun Oct 10, 2010 12:51 pm
Location: Sth East Melbourne

Re: BBQ Mesh (Frogmat Clone) $3.95 Bargain!

Post by titch »

Mixin wrote:Hope it's nationwide & not just in WA. I'll check out the local one tomorrow arvo.
Its was at Oakleigh, Vict, last couple a days
Cheers
Titch
urbangriller
Posts: 9453
Joined: Sun Sep 14, 2008 8:46 pm
Location: Perth WA

Re: BBQ Mesh (Frogmat Clone) $3.95 Bargain!

Post by urbangriller »

Busio90 wrote:Nice one Chris!
I'm sure I could read up in other threads but what's the advantage of using this mesh.


Nath
Non stick and the smoke goes through...great for anything delicate, fish, scallops, etc. You can lift the whole sheet, food and all off the grill if you want. Fat drips through it, if you use a solid sheed the food sits in the fat etc.

Handy stuff!

I got some samples in from China back in may 2010, a couple of the boys and I did some product testing, see the full review here:

http://www.aussiebbq.info/forum/viewtop ... &hilit=mat

Image

This is the bacon weave on the non-stick mesh

Image

Rolled and secured with toothpicks

Image

Cooked over direct flame with flame tamer in place.

Image

Cheers
Chris
Common Sense is so rare these days it should be a Super Power!
HaveFun
Posts: 6
Joined: Sun Mar 03, 2013 12:56 pm
Location: Mandurah

Re: BBQ Mesh (Frogmat Clone) $3.95 Bargain!

Post by HaveFun »

i checked today the Bunnings in Mandurah.. :?

i asked the staff but the only bbq liner what they have is the bbq mate.. not a mesh ?

where in bunnings can i find the magic mesh ?

thanks
cheers
stefan
Wer ein Hühnchen rupfen will, sollte damit rechnen, eine Pute an den Kopf zu bekommen

En la fiebre de la venganza también un buen hombre se vuelve bestia.

Image
urbangriller
Posts: 9453
Joined: Sun Sep 14, 2008 8:46 pm
Location: Perth WA

Re: BBQ Mesh (Frogmat Clone) $3.95 Bargain!

Post by urbangriller »

Bibra Lake has them, O'connor has run out.....probably coz I bought 6 and gave the checkout chick and everyone in the queue a lecture about what they are and how cheap they are!

Chris
Common Sense is so rare these days it should be a Super Power!
Santo
Posts: 67
Joined: Mon Mar 04, 2013 11:34 pm

Re: BBQ Mesh (Frogmat Clone) $3.95 Bargain!

Post by Santo »

Thanks for the heads up!

I just bought 3 of these from bunnings in maribrynong Melbourne, they have heaps of stock if anyone wants, I counted about 30 on the shelf.

As far as I can tell they have no wire in them, and seem to be just made of silicone....? Look good. Bargain!
Look, I think there's been a mistake.... Did you say Steak!?
chrisg
Posts: 782
Joined: Mon Oct 28, 2013 7:21 pm
Location: Perth WA

Re: BBQ Mesh (Frogmat Clone) $3.95 Bargain!

Post by chrisg »

:)

I'll check Joondalup tomorrow, also for the Fooz :)

Ever noticed that there never seem to be staff in the aisle for BBQ stuff at Bunnys ?

I want a power tool, or even some screws, no prob, bbq... desert....

I was thinking about a bit of moonlighting :)

Crazy really, unless their margin structure defies reality.

I get less and less interested in the bricks and mortar retail, so much easier to just get on-line. Which is sad, I like the interaction, but when it's not there....

A paradigm shift I suppose, which is sort of belied here by Masters opening and Bunnings expanding - but nobody said the big guys are not slowly freezing dinosaurs...

Cheers
Nath
Posts: 2095
Joined: Wed Mar 13, 2013 1:15 am
Location: Perth WA

BBQ Mesh (Frogmat Clone) $3.95 Bargain!

Post by Nath »

Hey Chris Balcatta has them I picked up one today. Had half a box left at least 10


Sent from my iPad using Tapatalk HD
Nath
chrisg
Posts: 782
Joined: Mon Oct 28, 2013 7:21 pm
Location: Perth WA

Re: BBQ Mesh (Frogmat Clone) $3.95 Bargain!

Post by chrisg »

:)

Thanks Nath, having a busy day today, see if they have any left tomorrow :)

Cheers
Post Reply