Page 1 of 1

Gasket glue

Posted: Thu Dec 04, 2014 2:48 pm
by Rockstar
Hey guys, what glue should I use to reseal my gasket?? I have 205 degree silicone but I'm hesitant to use a silicon sealer with cooking.

Re: Gasket glue

Posted: Thu Dec 04, 2014 7:00 pm
by Gumb
What gasket do you have ? The one I use is the self stick nomex.

You can also have a read through this thread.....
http://www.aussiebbq.info/forum/viewtop ... ket#p84152

Re: Gasket glue

Posted: Wed Dec 10, 2014 8:49 pm
by TMAN
Rockstar wrote:Hey guys, what glue should I use to reseal my gasket?? I have 205 degree silicone but I'm hesitant to use a silicon sealer with cooking.
Have a look at this company who specialise in gaskets !!
http://www.bbqgaskets.com/index.html
I'm thinking of sealing my webber and WSM

http://www.bbqgaskets.com/catalog_4.html
They deliver TO OZ

Re: Gasket glue

Posted: Sun Dec 21, 2014 11:19 pm
by tfx
I ordered some on line but it had gone off before getting here. The tube was like a rock.

Ended up using red high temp gasket silicone "for turbos and superchargers" from Supercheap Autos. Many high temp pizza's and high temp sears and it still has good grip.

Re: Gasket glue

Posted: Mon Dec 22, 2014 4:36 am
by Card Shark
Most fireplace joints will have high temp glue.

Re: Gasket glue

Posted: Mon Dec 22, 2014 8:08 am
by Hogsy
I used this on my komado and a kettle rotisserie, that was at least a year ago and it's still going strong
Picked it up at my local fireplace shop for under $10
Image

Re: Gasket glue

Posted: Thu Jan 22, 2015 10:22 am
by King Erik the 14th
I used Elmers white "school glue" from office works - cheap, non-toxic, works well (has lasted several years)